Home | About us | Contact
 
  Menu
  Timber
  Sheet Materials
  Decking
  Flooring
  Building Materials
  Power Tools
  Velux Windows
  Velux Blinds
  Fixings Nuts & Bolts, etc
  Paint
  Electrical Fittings
  Plumbing Supplies
  Door Furniture
  Internal Doors
  External Doors
  Windows

   

Technical Advice

bullet Paint Preparation
bullet Which Paint Tool
bullet Painting Wood & Metal
bullet Painting Inside & Out
bullet How to Hang a Door
bullet Laying Decking


 
Guide to getting started
 
  Getting started

It's a good idea to spend some time planning your project so that it runs smoothly. These simple tips can help.

Before you start

Plan the order in which the work needs to be done.
Always use the right equipment for the job.
Make sure you have good ventilation before you start painting or varnishing.
If you are using more than one pot of paint in the same colour, mix them together in a larger container in case of slight colour variations.

While you are painting

Always keep pets and children away from the area in which you are working.
Wear adequate eye protection.
When taking a short break, stand the paint in a cool safe place and wrap your brush in cling film.
Large surfaces such as walls and ceilings should only be painted with water-based paint.

When you have finished

If you've finished working and you've been using solvent-based paints, get your brush clean with Brush Cleaner
 

Brushes should be stored flat or on their handles. Standing them on their ends will bend the bristles and spoil them.
To reseal a can of paint so that it is airtight, wipe the rim of the can clean, replace the lid, place a block of wood over the top and tap it down with a hammer.

 

 
 
 
Timber | Sheet Materials | Decking | Flooring | Building Materials | Power Tools | Velux Windows | Fixings | Paint | Electrical Fittings | Plumbing | Door Furniture | Internal Doors | External Doors | Windows

Copyright 2006 Vividweb.net. All rights reserved